Dalton UPS ES33 Series (10-120)

Dalton UPS ES33 Series (10-120)

Dalton ES33 Online Double Conversion UPS 
Three Phase Input & Output With Isolation Transformer

10kVA – 120kVA
The ES33-Frindly Uninterruptible power supply is a combination 
of Dalton’s advanced digital signal processor ( DSP) control technology 
and a firm pursuit of a green manufacturing philosophy.
With minimum space, fewer components and controlled levels of noise pollution. 
The ES33 Series has a significantly reduced environmental impact. 
Therefore, it is feasible to design a UPS with reduced carbon footprint whilst 
achieving clean, continuous power for medical,industrial and computing loads. 
– Output power factor 0.9
– Online double conversion
– 3 phases UPS allow 100% unbalance load
– IGBT inverter and output isolation transformer
– Fully DSP control, high reliability and performance
– Dual input supplies 

Specifications

Model
ES3310 ES3320 ES3330 ES3340 ES3360 ES3380 ES33100 ES33120

Rating Power

10 KVA
9 KW
20 KVA
18 KW
30 KVA
27 KW
40 KVA
36 KW
60 KVA
54 KW
80 KVA
72 KW
 100 KVA
 90 KW
 120 KVA
 108 KW
                                       INPUT
Rated voltage 380 V / 400 V / 415 VAC
Voltage range 346 V ~ 456 V ( full load )
304 V ~ 346 V ( Voltage rating 10% )
Rated frequency 50 / 60 Hz
Frequency range 50 / 60 Hz ± 5 Hz
Power factor ≥ 0.99
Total harmonic distortion (THDI)
≤ 3% 
Input current-limiting 1.1 times of rated current ( 0.1 ~ 1.1 settable )
Rectifier delay start 10 s (1 ~ 300 settable )
Bypass voltage range ± 20% (settable)
                                      OUTPUT
Rated voltage 380 V / 400 V / 415 VAC
Voltage regulation ± 1%
Frequency Synchronized with utility in mains mode; 50 / 60 Hz ± 0.1% in battery mode
Waveform Pure sinewave
Crest factor 3:1
Total harmonic distortion (THDV) ≤ 2% ( Resistive load); ≤ 5% (non-linear load )
Transfer time 0 ms
Inverter overload capability Load ≤ 105%,long time work: 105% < load ≤ 110%,transfer to bypass in 60 min 110% < load ≤ 125%, transfer to bypass in 10 min 125% < load ≤ 150%, transfer to bypass in 1 min 150% < load ≤ 200%, transfer
to bypass in 200 ms 200% < load, inverter off (UPS shutdown) in 100 ms and transfer to bypass output
Slight adjustment of inverter
output voltage
± 5 V
                                        BATTERIES
DC voltage 336-360-384 VDC
Number of battery 28-30-32 PCS
Charging current Charging rate (settable) × battery capacity (settable) × number of battery group (settable)
Battery state display Battery remaining capacity and backup time
Battery self test Settable periodic self-test; manually configurable test time and voltage
                                    SYSTEM
Efficiency Line mode ≥ 94%, ECO mode ≥ 98%
Max. parallel numbers 6
Protections Short-circuit, overload, over temperature, over voltage, under voltage, battery low voltage and fan failure
Communications RS232 / RS485 / dry contacts (standard), SNMP (optional)
IP rating IP 20
Display 4.3 inches LCD touch screen ( Optional )
                                               OTHERS
Operating temperature 0 ~ 40℃
Storage temperature - 25℃ ~ 55℃ ( without battery )
Humidity 0 ~ 95% ( non-condensing )
Noise level at 1 m < 55 dB < 60 dB
Dimensions (W×L×H) (mm) 450×790×1150 650×710×1450 700×780×1650
Net weight (kg) 146 160 200 260 460 570 630 690